Multi Protector Hot Worker Light Coverall
RO12020
Fabric composition
Fabric composition
FLC320
80% cotton / 19% polyester / 1% antistatic

FR fabric type
FR fabric type
Treated

Fabric weight
Fabric weight
320 g/m2

Available sizing
Available sizing
UK38 - UK58

Benefits & features
Benefits & features

Concealed central non-metallic zip behind double flap

Two oversized chest pockets

Two back pockets, toolbar above left chest pocket

Two rule pockets

Two side pockets with trouser access and velcro closure


Inside leg length
Inside leg length
29"
31"
33"

Conforms to
Conforms to
EN 1149-5:2008
EN ISO 11612:2008 A1 B1 C2 D0 E3 F1
EN ISO 11611:2015 A1 A2 Class 2
IEC 61482-2:2009 ATPV 10.2 cal/cm2 Class 1
EN ISO 13688:2013

ARC level
ARC level
ARC 2

Available colours
Available colours
Navy
Orange

Multi Protector Hot Worker Light Coverall

Multi Protector is without a doubt one of the most complete and functional ranges around.

Multi Protector ensures wearer comfort, safety, functionality and superb industrial laundry behaviour all combined into one garment.

When we first started back in 2008 our main focus was the oil & gas industry. This was the basis for the Flamebuster range. Based upon
Pyrovatex technology this range offers the best protection against heat and flames, claims which are supported by many burn injury test reports. However…when besides protection against heat and flames industrial welding and grinding comes into play and then cotton fabrics – apart from the Arcbuster range – are less suitable for the job. Welding and grinding will result in fabric damages by means of hole formation which will fray out resulting in even bigger holes.

It is common knowledge that cotton / polyester blends are more suitable for welding and grinding because of the polyester which keeps the little holes from fraying out. The biggest issue with cotton / polyester is the high burn injury percentage which potentially could result in dangerous fabrics.

Multi Protector complies with the EN ISO 11611 Class 2 (welding standard) – the highest achievable class! As with the Arcbuster, we once
again have developed a fabric which exceeds the testing equipment limits. The impact of metal droplets stops at 40 yet the Multi Protector fabric can withstand much more. Comparable fabrics in the same blend hardly reach over 28 drops…It may not come as a surprise but we also managed to achieve the performance level E3 according to EN ISO 11612 – again, the highest level possible.