Multi Protector Multi Protector Basic Trousers
RO22265
ARC level
ARC level
ARC 2

Available sizing
Available sizing
UK28 - UK44

Benefits & features
Benefits & features

Two side pockets

Two back pockets

Knee pockets

Rule pocket on right leg


Fabric composition
Fabric composition
FLC320
80% cotton / 19% polyester / 1% antistatic

FR fabric type
FR fabric type
Treated

Fabric weight
Fabric weight
320 g/m2

Available colours
Available colours
Navy
Royal

Conforms to
Conforms to
EN 1149-5:2018
EN ISO 11612:2015 A1 A2 B1 C1 D0 E3 F1 (A1=50 washing cycles)
EN ISO 11611:2015 Class 2 A1 A2 (A1 = 50 washing cycles)
EN 61482-2:2020 APC 1 ELIM = 9,7 cal/m² ATPV = 10,2 cal/m²
EN 13034:2005 + A1:2009 type 6
EN ISO 13688:2013
ISO 6330:2012 - 60ºC
ISO 15797:2002 - 75ºC

Multi Protector Basic Trousers

Multi Protector is without a doubt one of the most complete and functional ranges around.

 

Multi Protector ensures wearer comfort, safety, functionality and superb industrial laundry behaviour all combined into one garment.

 

When we first started back in 2008 our main focus was the oil & gas industry. This was the basis for the Flamebuster range. Based upon
Pyrovatex technology this range offers the best protection against heat and flames, claims which are supported by many burn injury test reports. However…when besides protection against heat and flames industrial welding and grinding comes into play and then cotton fabrics – apart from the Arcbuster range – are less suitable for the job. Welding and grinding will result in fabric damages by means of hole formation which will fray out resulting in even bigger holes.

 

It is common knowledge that cotton / polyester blends are more suitable for welding and grinding because of the polyester which keeps the little holes from fraying out. The biggest issue with cotton / polyester is the high burn injury percentage which potentially could result in dangerous fabrics.

 

Multi Protector complies with the EN ISO 11611 Class 2 (welding standard) – the highest achievable class! As with the Arcbuster, we once
again have developed a fabric which exceeds the testing equipment limits. The impact of metal droplets stops at 40 yet the Multi Protector fabric can withstand much more. Comparable fabrics in the same blend hardly reach over 28 drops…It may not come as a surprise but we also managed to achieve the performance level E3 according to EN ISO 11612 – again, the highest level possible.