RO12385
Inside leg length |
Inside leg length 29"31" 33" |
ARC level |
ARC level ARC 3 |
Available sizing |
Available sizing UK38 - UK54 |
Benefits & features | Benefits & features Two large cargo pockets Two side pockets Knee pockets |
Fabric composition |
Fabric composition FLC320 + FLA18580% cotton / 19% polyester / 1% antistatic |
FR fabric type |
FR fabric type Treated |
Fabric weight |
Fabric weight 320 g/m2 + 185 g/m2 |
Available colours |
Available colours Royal |
Conforms to |
Conforms to EN 1149-5:2018EN ISO 11612:2015 A1+A2 B1 C2 D0 E3 F1 EN ISO 11611:2015 Class 2 A1+A2 IEC 61482-2:2018 ELIM 14.8 cal/cm2, ATPV 26.8 cal/cm2, APC 2 (7 kA) EN 13034:2005 + A1:2009 Type 6 EN ISO 13688:2013 |
CE Certificates |
CE Certificates 0598_PPE_200631_Issue_1_2020_10_07_SGS.pdf |
Declaration of Conformity |
Declaration of Conformity eu doc ro12085 ro12185 ro12285 ro12385 en rev 01 20201014.pdf |
User manuals |
User manuals uis frach-14.docx |
Multi Protector Double Layer Arc Flash BIB
Multi Protector is without a doubt one of the most complete and functional ranges around.
Multi Protector ensures wearer comfort, safety, functionality and superb industrial laundry behaviour all combined into one garment.
When we first started back in 2008 our main focus was the oil & gas industry. This was the basis for the Flamebuster range. Based upon
Pyrovatex technology this range offers the best protection against heat and flames, claims which are supported by many burn injury test reports.
However…when besides protection against heat and flames industrial welding and grinding comes into play and then cotton fabrics – apart from the Arcbuster range – are less suitable for the job. Welding and grinding will result in fabric damages by means of hole formation which will fray out resulting in even bigger holes. It is common knowledge that cotton / polyester blends are more suitable for welding and grinding because of the polyester which keeps the little holes from fraying out. The biggest issue with cotton / polyester is the high burn injury percentage which potentially could result in dangerous fabrics.
Multi Protector complies with the EN ISO 11611 Class 2 (welding standard) – the highest achievable class! As with the Arcbuster, we once
again have developed a fabric which exceeds the testing equipment limits. The impact of metal droplets stops at 40 yet the Multi Protector fabric can withstand much more. Comparable fabrics in the same blend hardly reach over 28 drops…It may not come as a surprise but we also managed to achieve the performance level E3 according to EN ISO 11612 – again, the highest level possible.