Multi Protector is without a doubt one of the most complete and functional ranges around.
Multi Protector ensures wearer comfort, safety, functionality and superb industrial laundry behaviour all combined into one garment.
When we first started back in 2008 our main focus was the oil & gas industry. This was the basis for the Flamebuster range. Based upon
Pyrovatex technology this range offers the best protection against heat and flames, claims which are supported by many burn injury test reports. However…when besides protection against heat and flames industrial welding and grinding comes into play and then cotton fabrics – apart from the Arcbuster range – are less suitable for the job. Welding and grinding will result in fabric damages by means of hole formation which will fray out resulting in even bigger holes.
It is common knowledge that cotton/polyester blends are more suitable for welding and grinding because of the polyester which keeps the little holes from fraying out. The biggest issue with cotton/polyester is the high burn injury percentage which potentially could result in dangerous fabrics.
Multi Protector complies with the EN ISO 11611 Class 2 (welding standard) – the highest achievable class! As with the Arcbuster, we once
again have developed a fabric which exceeds the testing equipment limits. The impact of metal droplets stops at 40 yet the Multi Protector fabric can withstand much more. Comparable fabrics in the same blend hardly reach over 28 drops…It may not come as a surprise but we also managed to achieve the performance level E3 according to EN ISO 11612 – again, the highest level possible.
Specs & Features
Elasticated waist
Tool loop left and right
Two side pockets
Two back pockets with flap and velcro
Tool pocket with a mobile phone pocket on the right leg with flap and velcro
Knee pockets
The product is fit for domestic laundry (ISO 6330 - 60ºC) and industrial laundry (ISO 15797 - 75ºC)
| ARC level |
 ARC 2 |
| Available sizing |
UK28 - UK44 |
| Product code | RO22267 |
| Inside leg length |
29" 31" 33" |
| Available colours |
Grey/Black |
| Conforms to |
EN ISO 13688:2013 + A1:2021EN 1149-5:2008EN ISO 11611:2015 A1 A2 Class 2 (A1 = 50 washing cycles)EN ISO 11612:2015 A1+A2 C1 D0 E3 F1 (A1 = 50 washing cycles)EN 13034:2005 + A1:2009 Type 6 Oeko-Tex Standard 100 AS/NZ 4399:1999 Sun protective clothing UPF 50+ (Excellent protection) EN 61482-2:2020 ELIM 9,7 cal/cm2 / ATPV 10,2 cal/cm2 / APC 1 (4 kA) |
| Fabric weight |
320 g/m2 |
| Fabric composition |
FLC320 80% cotton / 19% polyester / 1% antistatic |
| FR fabric type |
Treated |
| CE Certificates |
CE Certificates Frach-12 EU Type examination.pdf |
| Declaration of Conformity |
Declaration of Conformity eu doc frach-12 rev 01 20231212.pdf |
| User manuals |
User manuals 202502 general instructions NL-EN.pdf |
LCA – Understanding the numbers
Each ROOTS products with an LCA shows these key figures:
The key figures are measured in 5 phases
1. Upstream – Raw materials and components: fibres, trims, packaging.
2. Core Process – Production: spinning, weaving, dyeing, and assembly.
3. Downstream – Transport and distribution. Smaller footprint than you'd think.
4.1 Use – Laundry – Washing during use. 40 cycles for coveralls, trousers and jackets, 2 for parkas, bodywarmers and softshell jackets
4.2 Disposal – End-of-life: landfill, incineration, recycling, or reuse.
Read more about our full LCA process here: life cycle assessment
By buying this Trousers you will reduce your carbon footprint and save…
