Multi Protector Jacket
RO22167
ARC level
ARC level
ARC 2

Available sizing
Available sizing
UK36 - UK60

Benefits & features
Benefits & features

High collar
One chest pocket with flap and velcro
Two side pockets with zip
Pocket on left arm with flap
Loop on right chest,
Pocket inside with flap and velcro
Adjustable waist and wrist.

The product is fit for domestic laundry (ISO 6330 - 60ºC) and industrial laundry (ISO 15797 - 75ºC)


FR fabric type
FR fabric type
Treated

Fabric weight
Fabric weight
320 g/m2

Available colours
Available colours
Grey/Black

Conforms to
Conforms to
EN ISO 13688:2013 + A1:2021
EN 1149-5:2018
EN ISO 11611:2015 A1 A2 Class 2 (A1 = 50 washing cycles)
EN ISO 11612:2015 A1+A2 C1 D0 E3 F1 (A1 = 50 washing cycles)
EN 13034:2005 + A1:2009 Type 6
EN 61482-2:2020 ELIM 9,7 cal/cm2 / ATPV 10,2 cal/cm2 / APC 1 (4 kA)
Oeko-Tex Standard 100
AS/NZ 4399:1999 Sun protective clothing UPF 50+ (Excellent protection)

CE Certificates
CE Certificates
Frach-12 EU Type examination.pdf

Declaration of Conformity
Declaration of Conformity
eu doc frach-12 rev 01 20231212.pdf

User manuals
User manuals
202312 FRACH-12 instructions NL-EN.pdf

Multi Protector is without a doubt one of the most complete and functional ranges around.

Multi Protector ensures wearer comfort, safety, functionality and superb industrial laundry behaviour all combined into one garment.


When we first started back in 2008 our main focus was the oil & gas industry. This was the basis for the Flamebuster range. Based upon
Pyrovatex technology this range offers the best protection against heat and flames, claims which are supported by many burn injury test reports. However…when besides protection against heat and flames industrial welding and grinding comes into play and then cotton fabrics – apart from the Arcbuster range – are less suitable for the job. Welding and grinding will result in fabric damages by means of hole formation which will fray out resulting in even bigger holes.


It is common knowledge that cotton/polyester blends are more suitable for welding and grinding because of the polyester which keeps the little holes from fraying out. The biggest issue with cotton/polyester is the high burn injury percentage which potentially could result in dangerous fabrics.


Multi Protector complies with the EN ISO 11611 Class 2 (welding standard) – the highest achievable class! As with the Arcbuster, we once
again have developed a fabric which exceeds the testing equipment limits. The impact of metal droplets stops at 40 yet the Multi Protector fabric can withstand much more. Comparable fabrics in the same blend hardly reach over 28 drops…It may not come as a surprise but we also managed to achieve the performance level E3 according to EN ISO 11612 – again, the highest level possible.